Paper Pulp Machine
Home » Paper Machine » Kraft/Testliner Paper Machine

Kraft/Testliner Paper Machine

CONTACT US
  • Kraft/Testliner Paper Machine
  • Kraft/Testliner Paper Machine
  • Kraft/Testliner Paper Machine

Kraft liner board machine use waste paper, white shavings, virgin pulp as material to make high quality Kraft paper board. Finished products can be made paper roll.


  • Technical Data
  • Features
  • Working principle
  • Service
 

Technical Data of Kraft/Testliner Paper Machine:

Paper Grade Kraft Paper Board
Trimmed Width(mm) 1880-5800
Basic Weight Range(GSM) 80-200
Operating Speed(m/min) 150-800
Production Capacity(TPD) 45-750

  • 1. Over 30 years production experience,we are specializing in making all kinds of paper machines and pulp equipment.
  • 2.3 20000 square meters workshop with more than 200 staffs including 50 engineers will be your best support and specialize in making all kinds of paper recycling machines.
  • 3. Full technical support:we will provide the foundation drawings of the machine and installation support.
  • 4. ISO9001:2000 and BV certification.
  • 5. Strict quality control of every procedure,full guarantee of the quality of every single packaging.
  • The process of paper making line contains: Forming, Pressing, Drying, Calendering, Rewinding.
    Forming: After the paper pulp come into the headbox, it can spreads along the fine pulp evenly on the felts, which spread along the top and bottom of rollers.
    Pressing: By pressing felts, it can squeeze out as much water as possible.
    Drying: dryers section is arranged in group to ensure it can be operate at a gradually slower speed to compensate for paper shrinkage as the paper dries. It will discharge the water content down to a level of about 6%.
    Calender: Calendering can help to make the surface of the paper more sooth and glossy. What`s more, It also can ensure consistent thickness of paper. The pressure given by the rollers applied to the web influences the finish of the paper.
    Rewinding: To make it easier for shipping and conveying, we use rewinder to shape it into rolls and use slitter to cut the product into multiple strips to meet customers’s requirements.
  • 1. Offering comprehensive technical and business consultation services;
    2. Proposing the most suitable scheme and equipment for our clients;
    3. Designing and fabricating targeted products according to the special requirements of clients;
    4. Training periodically high qualified service technician.


Related Post