Paper Pulp Machine
Home » Paper Machine » Fluting/Corrugated Paper Machine

Fluting/Corrugated Paper Machine

CONTACT US

Corrugated paper machine is used for making corrugated origin paper in paper making line.

Service Online
+86-371-5512 9198
leizhanchina@gmail.com

  • Technical Data
  • Features
  • Working principle
  • Service

Technical Data of Fluting/Corrugated Paper Machine:

Paper Grade High-strength Corrugated Paper
Trimmed Width(mm) 1575-5800
Basis Weight(GSM) 60-150
Operating Speed(m/min) 100-800
Production Capacity(TPD) 15-500

  • 1. Over 30 years production experience,we are specializing in making all kinds of paper machines and pulp equipment.
  • 2. 20000 square meters workshop with more than 200 staffs including 50 engineers will be your best support and specialize in making all kinds of paper recycling machines.
  • 3. Full technical support:we will provide the foundation drawings of the machine and installation support.
  • 4. ISO9001:2000 and BV certification.
  • 5. Strict quality control of every procedure,full guarantee of the quality of every single packaging.
    • Corrugated paper machinery contains the following sections: Forming, Pressing, Drying, Calendering, Rewinding.
      Web end: While the fine pulp enters into the headbox, it will be spreaded along the felts on the web end evenly.
      Press section: The water in pulp can be squeezed out as much as possible by pressing felts with press roll.
      Dryer section: Dryers works in group to ensure it can be operate at a gradually slower speed to compensate for paper shrinkage as the paper dries. It will discharge the water content down to a level of about 6%.
      Calender section: Calendering helps to make the surface of the paper more sooth and glossy. What’s more, to ensure consistent thickness of paper.
      Coating: Sizing improves the paper’s water resistance, printing properties and surface bond strength.
      Rewinding section: Shape sheet into rolls to make it easier for shipping and conveying, and use slitter to cut the product into multiple strips.
  • 1. Offering comprehensive technical and business consultation services;
    2. Proposing the most suitable scheme and equipment for our clients;
    3. Designing and fabricating targeted products according to the special requirements of clients;
    4. Training periodically high qualified service technician.