Paper Pulp Machine
Home » Solution » Coating Board Paper Making Line » Light Impurity Separator for Paper Mill

Light Impurity Separator for Paper Mill

CONTACT US

    Light impurity separator mainly used for dealing with light impurity and tailing in coarse screening section to remove Small stones, staples and small metal blocks. Adopting the up-flow slurry feeding method, using the high-speed rotation of the rotor to generate a strong vortex in the shell, and light impurities are gathered in the center of the vortex and discharged from the center port on the top of the shell. High quality, high efficiency and low cost.

     

    Main Features of Light Impurity Separator

     

    1. The shell has an inverted cone design and a concave top structure, which can form a strong eddy current, and a low pressure area is formed on the top of the shell to effectively collect light impurities and discharge them out of the machine;
    2. The rotor pulp chamber is higher than the bottom surface of the shell, and a low pressure area is formed around the rotor to compensate for heavy impurities. The heavy impurities are thrown to the outermost layer of the vortex under the action of centrifugal force and deposited in the groove on the outside of the sieve plate. It is convenient to be discharged from the body, and at the same time, it reduces the wear of the cutter head and the sieve plate by heavy impurities, and can prolong the service life of the rotor and the sieve plate.
    3. 30% less impurity content in good pulp than fiber separator.

     

    Full set paper recycling line stock preparation line machine can be provided by Leizhan company. High efficiency, less fiber loss and low energy consumption. Contact us for more details. Email address: leizhanchina@gmail.com.